Shur Strip H914
Shur Strip H914 is an alkaline paint stripper formulated to remove vinyls, acrylics, most epoxies and polyesters from steel, plastic and nylon surfaces.
Shur Strip H914 is a tank immersion material which is used between 20% and 50% by volume with water at 180°F to 210°F. Exact concentration will depend upon the particular paint base to be stripped. Stripping time varies from a few minutes to 20 minutes or more. When the coating has been loosened, a pressure rinse is recommended to assure complete removal of any residue.
When preparing new solutions or adding to existing ones, slowly add to surface of solution while stirring to avoid splattering. Do not add large amounts of product to solution at any one time.
Shur Strip H914 is an alkaline paint stripper formulated to remove vinyls, acrylics, most epoxies and polyesters from steel, plastic and nylon surfaces.
Shur Strip H914 is a tank immersion material which is used between 20% and 50% by volume with water at 180°F to 210°F. Exact concentration will depend upon the particular paint base to be stripped. Stripping time varies from a few minutes to 20 minutes or more. When the coating has been loosened, a pressure rinse is recommended to assure complete removal of any residue.
When preparing new solutions or adding to existing ones, slowly add to surface of solution while stirring to avoid splattering. Do not add large amounts of product to solution at any one time.
Shur Strip H914 is an alkaline paint stripper formulated to remove vinyls, acrylics, most epoxies and polyesters from steel, plastic and nylon surfaces.
Shur Strip H914 is a tank immersion material which is used between 20% and 50% by volume with water at 180°F to 210°F. Exact concentration will depend upon the particular paint base to be stripped. Stripping time varies from a few minutes to 20 minutes or more. When the coating has been loosened, a pressure rinse is recommended to assure complete removal of any residue.
When preparing new solutions or adding to existing ones, slowly add to surface of solution while stirring to avoid splattering. Do not add large amounts of product to solution at any one time.